Best Low Pressure Shower Heads In UK

Many people often imagine the actual cause of their showerhead experiencing low pressure. When the shower head of a home is being used for a long time, it can start developing certain nagging problems. While it may be difficult to simply pinpoint to a single problem or cause, it is possible to identify the major issue.

Shower Heads

When there is a blockage in your shower head, there’s every possibility for it to malfunction. If you are experiencing this kind of low pressure in your shower head, certain steps can be taken to ameliorate the problem. First, you will have to unscrew the shower head from its riser. High-pressure water can be used to clean the head to retain better efficiency.

This is achieved after the shower head has been soaked in warm soapy water over a period of time. When carrying out this process, ensure to avoid adding harsh chemical but a bit of fairly liquid. This is because the shower head can be damaged by adding harsh chemical to the warm soapy water. In case the shower head is still experiencing constant blockage, then you may replace it.

There is every possibility to experience a low-pressure effect in your shower head based on the location of the boiler. This is especially critical for people using an electric shower head. If the electric shower is on the ground or first floor and the boiler lies in the attic, then gravity will help to pull the water downward. This implies that you will get higher pressure in return after the process.

If the problem of constant low pressure occurs without any notification, then it may be time to buy a pump to increase the efficiency. There will be a constant blockage if you are always using a power shower head. In this content, you will some major causes of low pressure in shower heads and the best remedy. This article will also help you discover some decent shower heads that people living in the United Kingdom can depend on, time and again.

Low Water Pressure Causes You May Not Believe

When two different plumbing fixtures are forcibly turned on at the same time, it will definitely result into low water pressure scenario. Whether they are the bathroom/kitchen sink, outside garden hose, the shower, or even the toilet, you may eventually experience low water pressure.

When one fixture is operating, there is every possibility for your water pressure to remain sufficient. When the second fixture comes into effect, you will eventually discover a reduction of water flow. Low water pressure can affect a home or an apartment in a plethora of areas or ways. Check for a blockage or an obstruction if low water pressure only exists in your shower head.

It will be wise to check if your shower head is using any form of water conservation filter installations. Nevertheless, there is a gamut of situations and factors that can influence low water pressure in a shower head. On this note, it is important to know the actual cause of your low water pressure and finding the best solution to resolve the problem.

Key Problems Leading To Low Water Pressure In Shower Heads

  1. Mineral deposits
  2. Peak periods
  3. Water Leaks
  4. Home valves
  5. Elevation
  6. Pressure regulators

1. Mineral Deposits:

In properties or older homes built with galvanized iron pipes, avoiding mineral deposits may be nearly impossible. Over time, horizontal pipes and hot water will not be able to speed up the procedure of liquid flow. In case, you have having a feeling that the problem is caused by piping or mineral deposits, then hiring a certified, professional and reputable plumber remains the solution. Before hiring the professional, ensure they do a thorough estimate of the repairs.

This will give you a view of the extent that mineral deposits have caused on your shower head. Mineral deposits come with several sediments of different kinds. This can even aggravate the repair to your shower head. With the right plumber in the home, you will be able to tell the nature of the mineral deposits and find the best solution.

2. Peak Periods:

Many people usually operate during the same time of day and you may not realize it. When people around your neighborhood are using their shower head at the same, it may lead to the reduction of water pressure. In most case, people may like to have their bath during the morning period. When the number of people using the shower goes beyond anticipate, there is bound to be low water pressure.

Watering the lawn in the evening time is something most people do often. In the UK, it has become a common practice for people to wet their lawn. When this occurs at the same time, it will definitely reduce the pressure of your water flow inside the shower head. The only way to resolve this problem is to reschedule the time you use the shower different from other people in the neighborhood.

3. Water Leaks:

Water leaks have become a huge problem causing low pressure in shower heads. If there is the slightest leak in the pipe that draws water into your property, it will affect the pressure within the shower head. Most people are usually troubled on how to find the actual spot of water leaks. In this case, you will have to ignore the bill and focus on the meter of your home. Concentrating on the bill will make you go the opposite direction. If you want to achieve the best result, it is expedient to turn off every water tap outside and inside of your home. Go check the meter once every tap is shut off in your home.

In the next two hours, return to check the function of the meter for a proper confirmation. If the level of your water has increased, it implies you may be experiencing a leak somewhere in the house. Contact a professional plumbing firm to handle the water leak problem. Water leaks can cause a huge damage to your property and even life if it leads to flooding. Ensure that the hired professional plumber understands the entire concept of water leak to handle the problem.

4. Home Valves:

By accident, valves can sometimes be completely or partially turned off. It is important to take of two major valves in your property. These valves should always be in the “on position” when used at home. The home and customer valves are the most important for anyone will to experience smooth flow of water at home or business center. Users will always find the customer valve right inside or within the meter box. The home valve is also found close to the hose bib. This is the exterior water hose faucet located in the front of your property.

When these valves are not in their “on position” it will lead to experiencing low water pressure at home. How cognizant are you to both the home and customer valves? This is a question you should always ask yourself if you want to prevent low water pressure at home. If you are mindful of the position of your home valves, then getting rid of any low water pressure is possible. Sometimes, little children may play with these valves leading to the slight turning of their position.

5. Elevation:

Do you know that water cannot be compressible? Many people fail to understand that water remains a non-compressible liquid. In fact, it will display the special way of moving pressure horizontally when found in a confined environment. When the pipe is perfectly vertical, water will also show the same pressure as required. This can also occur if the pipe is not even available. For this reason, it is crucial you position your water tank higher than any area of your home.

The purpose of putting water storage tank higher than anticipated is to help the flow by gravity. If you are able to consider the value of elevation, then low water pressure will not occur in your home. Elevation has been one of the best factors and source of help to any home experiencing low water pressure. It works like weird fire to help water flow by gravity to your home. Either vertically or horizontally, applying elevation techniques will make water flow at a high pressure in any property or home.

6. Pressure Regulators:

In most cases, you will discover that water pressure regulators come in a bell-shaped design. This device is often located in the front hose connection of any given property. At about forty-five to sixty psi, these regulators are often preset by the producer and may not require any form adjustment. The actual problem of low water pressure can occur within this device. There are instances when you have to replace your pressure regulators if things go bad. If you want to handle the issue yourself rather than calling a professional plumber, it may end up causing more problems.

With a licensed, certified and professional plumber, the problem of a pressure regulator can be resolved in an ephemeral of time. Low water pressure can be devastating if you don’t have an immediate solution. For instance, if you don’t understand the concept of the pressure regulators, it can lead to further destruction in your home. Knowing when to replace a pressure regulator can go a long way to resolving any problem associated with low reduction of water flow in your apartment or home. To combat low water pressure in your shower head properly, ensure to determine the state or functionality of these regulators.

7. Not Hiring A Professional Plumber:

Apart from the points mentioned earlier not hiring a professional plumber can as well lead to complicating the issue of low water pressure in the shower head. If you are planning to increase or boost water pressure in your home, it may be a simple task without hiring any professional. When you are handling complex issues such as leaks, blockage, schedules or pipe erosion, it is a good idea to contact an expert in the plumbing field. If you are savvy enough to monitor water usage schedules and mounts or even check valves, then there will not be the need to hire a professional.

How many people are savvy enough to understand these things? This is a question that you will have to answer yourself. Taking matters to your hand with lack of sufficient knowledge may eventually increase low water pressure problems in your shower head. The last thing anyone will want to experience is to increase their low water pressure problems in the shower head. On this note, it is recommended to call a professional plumber today to help resolve the problem rather than handling the issue yourself.

Do Not Commence The Day With A Dribble – Fixing Low Water Pressure In Shower Heads

People who depend on their shower may start the day by waking up to the reality of this device. If this is your case, you are not alone. The job will not be done properly if your shower head is experiencing low water pressure. The pipes or your house is not always where the problem emanates from.

There is every possibility for the problems to be solved by using a simple equipment or fix rather than putting up with sub-par pressure. It is a simple task to increase the pressure in your weak shower head device. This is especially when you are able to figure out the major cause of the problem.

Faulty Pipes:

It is possible for the pipe itself to have problem or cause the issue of your shower head. The pipe should be your next area of suspicion if the cleaning the shower head does not work. Molten-zinc is the main product of a galvanized pipe. The truth is that you can find modern homes using galvanised pipes any longer. These pipes usually create leakages and experience total corrosion over time. It implies that water would have dropped off before getting to your shower head.

The rust and corrosive effects in the pipe is usually caused by zinc. When this occurs, you will experience blockages and the falling off the walls of your pipe. Since the flow will have to move through mounds of rusted metal, you will get water with a faint mix of copper. Faulty pipes may not lead to any alarming health issues for a homeowner. The truth is that leaving faulty pipes for a long time will cause the blockage or accumulation of sediments or deposit. When this occurs, it will make your home experience low water pressure throughout.

At first, you may think it is a shallow problem, but the in-depth of low water pressure can be devastating. It is not a replacement problem, but having a shower head that functions effectively. The normal time to replace all galvanised pipes should be around thirty to forty years. In recent times, these pipes have been overdriven by other materials like copper. If you are experiencing low water pressure in your shower head, it is possible to make a test on the kind of pipe runs through the home.

Choose a pipe and apply a scratch test to identify the kind of low water pressure problems occurring in your shower head. If during the scratch test, a copper colour signifies the same element. If the test is displaying a silver grey colour, it means a galvanised pipe runs through the piping of your home. In most cases, copper pipes will prevent the accumulation of deposits and rust. It is considered a rust problem if you have low water pressure with galvanised pipes. It is evident through the orange rust forming colour that appears on the outside of your pipes.

Blaming Your Shower Head:

According to normal regulations, it is often believed that many shower heads are created to reduce the flow of water. This is done to deliver water or flow for a specific amount per minute. To be frank, it is a great and well-designed principle. Nevertheless, this concept is usually taken out of context and thereby causing low water pressure. The best way to handle this problem is by buying a new shower head. Shower heads are not too expensive to purchase, but ensure to check the inner washer before investing your money.

The function of the washer is to reduce the flow of water entering the shower head in your home. Using a drill can help you widen the size of the washer to enable water flow smoothly. If the shower head is stingy, this process can help to resolve the problem quickly. However, if your shower head is showing other signs, then go on to do a thorough monitoring. When the inner section of the washer gets clogged, then removing the shower head is eminent. Go ahead and clean thoroughly and remove anything that stops or limits the flow of water.

It is not a difficult task to screw on and off a shower head and does not require any special equipment. Instead of blaming your shower head, you can apply the simple technique explained in this section. It is the best way to tackle a shower head problem without any difficulties. Using this method will at least help you discover the immediate problem of your shower head for real.

Bringing Your Low Water Pressure Problem To An End

As mentioned above, experiencing rust inside your pipes will not cause any major health problems. For drinking water, you can simply install tap filters. If you decide to use the water in the same way, be assured that nothing will harm your health. Remember, it is short-term approach that can be used to enable anyone continuously use rusty water.

In the long run, it is better to replace any pipes experiencing rust. Replacement is crucial when you experience low water pressure in your shower head. For every home, you have different pipes suiting their need and function. In some cases, you can consider copper pipes being the best along with other materials such as polyethylene.
The unsatisfactory pressure in your shower head can be caused by only a few things. Calling a professional plumber is great if the problem displays something beyond a faulty shower head. Nevertheless, the medicine to bringing your low water pressure problem resolved in a shower head is by knowing the actual cause.

Steps To Boost Low Water Pressure Shower Head

Before finding a solution to your low water pressure shower head, it is better to have or experience the negative part of the device. The first sign to show that your shower head is bad remains a weak pressure display. Are you looking for a quick and reliable method to fix low water pressure shower head problem? The ultimate culprit remains corroded water pipes. Nevertheless, the problems or causes may occur in several other ways. Instead of getting rid of the shower head or ripping out all your pipes, these simple steps can help. First, you will have to check if your shower head is really experiencing low water pressure. To achieve this, simply use a test for measuring water pressure gallons per minute.

Step 1: Change Water-Limited Shower Head

If you are using a low-flow shower head, the water pressure will be reduced. Even if it is water limiting device or filter installed to in your home, it will also produce the same low pressure. Ensure that the concept is authorised in your environment before making any changes. First check the area you live in the United Kingdom and follow the regulation properly prior to making any changes.

Step 2: Clean Out Deposits/Sediments

A shower head can be affected by the accumulation of scales and mineral deposits over time. It is not a scenario of if, but when this action takes place. It is important to know that all water you buy from the store apart from distilled options have minerals. Take a step by unscrewing your shower head. At least for 8 hours allow your shower head to soak in a container or bowl of vinegar. Use a toothpick to get rid of the remaining particles. In case, you try everything and the mineral deposits remain, then simply visit the market for another shower head.

Step 3: At Curb-side Main Increase Volume

There is every possibility for an entire house to experience complete low water pressure. This may be caused by the curb-side main remains not completely turned on. The meter is the actual area where water enters your home normally at curt-side. It also shows the shut-off valve being plugged to the meter. At this juncture, you will have to make sure the valve remains in a counter-clockwise position. In most cases, you don’t have the authorization to touch curb-site meters. A provider should be contacted if you will touch the meter itself. A worker will be sent by your water provider to assist you.

Step 4: Where Water Enters Your Property Increase The Volume

It is possible for a worker or previous homeowner has reduced your water pressure. By simply turning down the water main value, the pressure of flow entering your home will reduce. The main supply line comes with two well-designed shut-off valves. As a homeowner, you have the authority to turn these valves on and off. Turning these valves on and off can be for a plethora of reasons. If the previous occupant rented the house out, the volume may be turned down. This will make the occupant to make use of less water.

If there is water leak, it can be turned down just like the case of the curb-side main. Even for a construction purpose, these valves can as well be turned down. The most important thing to do is turning the valves clockwise. It is expedient to know that these valves have the tendency to rust or get corroded. Ensure that a counter-clockwise position is maintained for a ball valve. A professional plumber should be hired if any section of the pipe close the valve looks damaged. Flooding may occur if you risk snapping the pipe until the curb-side main is turned off.

Step 5: The Volume Of Your Single-Control Should Be Replaced

The volume valve system is another important item that can affect the pressure of your shower head. If you are using a single control shower, it is important to always check the volume valve system. Without any scintilla of doubt, this area is usually complicated and pricey. With time, this system can determine the pressure of water flowing into your shower head. The best option of dealing with this item is ply replacing it because repair remains difficult.

Step 6: In-Line Shut-Off Valves Should Be Opened

Provided the main water supply valves have been completely opened, go ahead to check properly for any confirmation. Nevertheless, there may be other shut off valves available you did not know about. In some properties, you can find the presence of an in-line shut-off valve. These valves can be found on a separate branch pipelines. The valves are often used as emergency stops. If you are carrying out a project on a local area, these valves will provide comfortable results.

For instance, if you ware working on the sink, toilet, or shower head and don’t want to shut off water supply entering the home, then ensure to make use in-line valves. In most cases, the supply point often acts as the normal place to find these shut-off valves. The pipe connecting the shower head remains the best place find these shut-off valves for property having a basement. For full pressure, you will have to turn the valve counter-clockwise.

Best Low Pressure Shower Heads To Use In The United Kingdom:

If you are living in the United Kingdom and wondering how the best low pressure shower head to buy, this content will help you discover reliable products. It is a Herculean to find reliable and dependable low pressure shower heads in the market today, especially if you do not have prior knowledge. To help cut through the chases and driving home to the right direction, this paragraph is dedicated to help you find the best product in the market. Keep reading to see the different low pressure shower heads that can used comfortably in the UK.

#1. H&S Shower Head Universal Bath Shower Handheld Handset Chrome

If you want to have a relaxing shower, this product remains the right choice. This universal shower head comes with five unique setting features. For a deep message, one of the product’s settings often acts as a pulse. This will also help you get rid of stress accumulated during the day. Another amazing feature of the product is its stainless steel body. It implies that the product will not experience any form of rusting. The stainless steel body also displays a modern and innovative shower area for users.

This is a product that must be found among the needs for your bathroom. The product is from a bright shining chrome finish of high-grade ABS designed material. To satisfy your needs of comfort, the product display five spray patterns. It is powerful in strength and lightweight as well. It can be compatible with other shower items because of its universal fitting features. The product is easy to use and attaching it to the wall will not pose any problem to the user. The most important thing to know when using this product is to screw it in place. It can be used with most shower head pipes with any complication.

#2. Niagara N2915CH

Niagara N2915CH

Niagara N2915CH is the ideal low-pressure shower head for people that want to abandon their normal local options. It is great because the product has the capability to use up to forty percent less water than any local low-flow shower heads. With this product, you will get a consistent and guaranteed flow rate irrespective of the current water pressure. It is a great product that can also help fix any plumbing repairs at home.

#3. Waterpik SM-451T 2.0

One thing that makes the Waterpik SM-451T 2.0 unique is because of its premium optiflow technology. It is designed with a five-foot hose and remains a special handheld shower head. Installing the Waterpik SM-451T 2.0 can be done in a couple of minutes. At the bottom, you will see the handle fitting perfectly with the bracket. The higher position design of this handheld shower head product is amazing.

The bracket of this product also contains the water restrictor for easy flow. Using pliers will help to remove the bracket from any grip holding it down from the white plastic part. In the package of the product, users will discover that the hose comes with tightly held coil. Without any doubt, the Waterpik SM-451T 2.0 is work investing your last cash in.

#4. Waterpik Twin Turbo Handheld Shower Head, DSL-653

Waterpik has maintained its leadership in the market ever since 1962. It has helped in the manufacturing and creation of oral health care and innovative personal products. The twin turbo handheld shower head from Waterpik is one of the best you can rely in a time of need. With its optiflow technology, the product is able to provide up to thirty percent more water flow at reduced pressures. It is designed to unleash around six dual-source technology sprays.

These sprays are able to produce a high-power experience than the normal or traditional shower heads. Installing this handheld shower head will not take you several minutes. It can also help to product around two gallons of water per minute. It two side-by-side turbo massage jets make the product different amount other shower heads. These jets also have the capability to deliver amazing massaging strength. It has anti-clog nozzles and five-foot faux chrome hose.



When talking about installation, KES P701 EXTRA LARGE 7 is one of the easiest low-pressure shower head to purchase. It seven function features will make you enjoy the entirety of the product, time and time again. Even its universal G ½ connection remains compatible with most shower hoses in the marketplace. The multi-layer chrome finish of the KES P701 EXTRA LARGE is designed to prevent tarnishing, corrosion and even scratches of any kind.

It comes with a great longevity and quality features based on the engineering grade plastic ABS design. When low water pressure is all you experience at home, it may be time to give this unique and amazing product a try. It will last for a long time, helping to save money. When compared to the services the product offers, you can be assured to overcome the problems of low water pressure.

#6. Deliao Bathroom Handheld Shower Head High Pressure 1.3

Deliao handheld shower heads are one in a million today. This product is able to stand the test of time due to its dual ABS plastic construction. This feature is also able to help you get quality results when using the product at home. The patented technology that helps operate the device will help to add jet engine power into your shower head. For best shower experience, the product comes with self-pressuring features. It can also help to boost the oxygen level in your water.

It does not experience clogging problems and designed with comfortable control adjustment features. The PVP plating that comes with the design of the product makes it advantageous for users. The product displays five layers of plating with its well-polished chrome. This Deliao 1.3 handheld low water pressure shower head unleashes a shiny and smooth surface. It is durable and never fades off. Its metallic luster along with the uniform colour has made the product superb when used.

The Deliao 1.3 is both corrosion and oxidation resistant. It can get rid of calcium accumulation in an ephemeral of time. To give customers hope when using the product, the manufacturer has assigned a five-year warranty. Before being sold in the market, the product has completely passed through five amazing phases. It is not a difficult task to install the product before use. Above all, the cost of purchasing the Deliao 1.3 will not make you break the bank.

#7. Aqua Elegante 6

Just like most product in the market, the Aqua Elegante 6 has around five-year warranty for users. The product is also designed to resolve problems associated with hard water. Calcium accumulations are prevented from mounting up in this product due to its self-cleaning nozzles. The Aqua Elegante 6 can be used in an RV, home and outdoors. Are you experience both low pressure and hard water problems at home?

Say goodbye to these problem by purchasing this product today. The restrictor of the Aqua Elegante 6 can be removable at any point in time. For increased water pressure, the removable restrictor can help to boost low flow. This means that you will be able to get wonderful spa-like showers when using the product. Buyers will not find either a hose or bracket after purchasing this low pressure shower head.

The product is also designed from a massive ABS plastic material. It is not all products that come with enormous or several settings. In the case of the Aqua Elegante 6, you will find around six unique settings. This means that you have the opportunity of selecting the best shower setting that suits your need. These settings can be found in two mixed modes, water saving, gentle rain, pulsating massage and saturating power blast.


Reading through this amazing content will help you discover the major reasons for experience low water pressure in your shower head at home. From faulty pipes, pressure regulators, mineral deposits, peak periods, water leaks, home valves and elevation, you will be able to know the main problem of your shower head. In fact, simple ways to overcome this nagging problem of your shower head have been included to help handle the situation perfectly. Using any of the named products above is a great remedy to any low water pressure you may experience at home or outdoors.

Leave a Reply